Specifications - Emos E5018 Anleitung

1
GB | Wireless Weather Station
The weather station displays the time along with 2 alarm clocks
with snooze function, the weather forecast, interior and exterior
temperatures, humidity, the atmospheric pressure, lunar phase, the
sunrise and sunset times, and also the moonrise and moonset times.
It has a memory for the minimum and maximum measured values.
Please read this product guide thoroughly before using the device.

Specifications:

Radio controlled clock
Accuracy: ±2 °C
Interior/exterior temperatures: 0 °C to +50 °C; -50 °C to +70 °C
Temperature resolution: 0.1 °C
Wireless sensor: broadcast frequency 433 MHz
Radio signal range: up to 30 m in free space
Number of sensors: 3
Relative humidity: 20 % – 95 %
Resolution: 1 %
Accuracy: ±5 %
Barometer pressure scale: 850 hPa to 1050 hPa
Power supply:
main station: 2× 1.5 V AA battery (not included)
sensor: 2× 1.5 V AAA battery (not included)
Size and weight:
main station: 189 × 139 × 30 mm; 306 g (without batteries)
sensor: 60 × 99 × 21 mm; 43 g (without batteries)
List of icons and buttons
Front display
A – interior temperature below
+4 °C
B – weather forecast icon
C – pressure trend
D – depleted battery icon
E – exterior sensor number
F – temperature trend
G – humidity trend
H – exterior temperature and
humidity
I – interior temperature and
humidity
J – physical comfort icon
K – date, day of the week,
week number
L – DCF77 radio signal recep-
tion icon
M – alarm clock icons
N – current time
O – moonrise and moonset
P – country and city code
2
R – sunrise and sunset
S – lunar phase icon
Rear side
Button push
CHANNEL Sensor number
Pressure history over
HISTORY
the last 12 hours
1 step back
- Display temperatures
in °C or °F units
1 step forward
Display max/min tem-
+
perature and humidity
values
MODE Alarm time No. 1, 2
RESET Erase all values
Upper side
SNOOZE/LIGHT – Display light and snooze functions
Wireless sensor
Front side
- external temperature
- external humidity
CH 1, 2, 3 – No. of channel reserved for communication of the sensor
with the weather station
Rear side
CH – switching for sensor channel
°C/°F – temperature units
Commissioning
1. First insert the battery into the weather station (2× AA), then
to the wireless sensor (2× AAA). When installing the batteries,
ensure correct polarity to avoid damaging the weather station or
the sensor. Use alkaline batteries of the same type only; do not
use rechargeable batteries.
T – pressure value and history
Button hold (3 seconds)
Search for sensor No. 1, 2, 3
Setting of altitude above
sea level, pressure units,
weather icon
Thermal limit setting
Setting the alarm, time
and date