AEG DVD-R 4518 Bedienungsanleitung Seite 74

Changing the default settings Themen
74
05-DVD-R 4518 AEG - GB 74
Name: Press Cursor button
- The fi rst letter of the program name is highlighted in colour.
- You can now use the Cursor buttons
to select letters, numbers or symbols.
- Press Cursor button
entry in the next position.
- Press the SELECT button (Fig. 3/11) to confi rm your selec-
tion.
Scan Mode: In this menu you can select whether the search
should be carried out according to frequencies, channels or
special channels.
Channel, Frequency, S-Channel: Begin your search accor-
ding to the search mode that has previously been set.
- Press Cursor button
the search.
- Press the STOP key (Fig. 3/22) to cancel the search.
Sound Mode: Adjust the search of the DVD recorder to the co-
lour transmission system of your region. The following options
are available:
- PAL BG: (A widely-available system in Europe.)
- PAL DK
- PAL I
- SECAM L
- SECAM B/G
- SECAM D/K
- Press the SELECT (button (Fig. 3/11) to confi rm your selec-
tion.
Skip: With this function you can hide the currently selected sta-
tion in the station list. It is then no longer included in the station
selection with CH+ and CH-. Select "On" or "Off" and press the
SELECT button (Fig. 3/11) to confi rm your selection.
Fine Tune: Press Cursor button
tune the currently selected station.
3. With Cursor buttons /
like to store your entries or "Cancel" in order to cancel the process.
Sort channel order
Once the search has fi nished you can sort the stations as you wish.
To do so, please proceed as follows:
1. Use the Cursor buttons to select the menu "Sort channel order".
2. Press the SELECT button (Fig. 3/11). A list of the stations that
have been received is displayed.
3. With Cursor buttons /
red station.
4. Press the SELECT button (Fig. 3/11) or Cursor button
(Fig. 3/33) to move the station to the right-hand list.
5. With Cursor buttons /
to the desired position.
(Fig. 3/33).
/ (Fig. 3/12, 32)
(Fig. 3/33) in order to continue the
or (Fig. 3/10, 33) in order to start
or (Fig. 3/10, 33) to fi ne-
(Fig. 3/12, 32) select "OK" if you would
(Fig. 3/12, 32) you can select the desi-
(Fig. 3/12, 32) you can move the station
05.07.2006, 10:31:33 Uhr