Antenna Connections; Switching On The Player - AEG DVD-R 4518 Bedienungsanleitung

Starting up Themen
Inputs on the front
Fig. 1/10
Fig. 1/11, 12, 13
Fig. 1/14

Antenna connections

Fig. 2/16
Fig. 2/25

Switching on the player

58
05-DVD-R 4518 AEG - GB 58
DV Input (on the front)
Connect a cable for the transmission of audio and video data from an
output device, e.g. a camcorder.
1. Insert the plug into the socket on the front of the device.
2. Insert the plug into the corresponding socket of your output device.
AV Input (on the front)
Connect a cinch cable for the transmission of audio and video data
from an output device.
1. Insert the plugs into the sockets on the front of the device.
2. Insert the plugs into the corresponding sockets of your output
device.
USB Input (on the front)
Connect a USB cable for the transmission of audio and video data
from an output device.
1. Insert the plug into the socket on the front of the device.
2. Insert the plug into the corresponding plug of your output device.
NOTE:
Data fed in via the USB connection cannot be recorded.
Antenna Input
Connect the cable of your antenna system to the socket on the rear of
the device.
Antenna Output
Connect a coaxial cable for the transmission of the antenna signal to a
further playback device such as a television set or video recorder.
1. Insert the antenna plug into the socket on the rear of the device.
2. Insert the antenna plug into the corresponding sockets of the next
device.
Press the „ " button on the front of the DVD recorder in order to
switch the device on.
05.07.2006, 10:31:13 Uhr