Playing Cds/Mp3; Programmed Play - AEG SR 4316 CD/MP3 Bedienungsanleitung, Garantie

Playing CDs/MP3

This is how you play a CD
1. Turn the function selector switch (6) to the „CD/MP3" positi-
on. The time display appears.
2. In order to open the CD compartment (11), press the OPEN
button (12).
3. Insert an audio CD with the printed side facing upwards on
to the central cone so that the CD clicks into place and then
close the lid of the CD compartment.
4. After a few seconds the total number of songs/tracks is
shown in the display (13).
5. Press the PLAY/PAUSE button (14) in order to play the CD.
The CD will play from the fi rst title. The track currently being
played, or MP3 are shown in the display (13).
6. In order to remove a CD, please press the STOP button
(17), open the CD compartment OPEN (12) and lift the CD
out carefully.
Always keep the CD deck closed.
NOTE:
If a disc is incorrectly inserted - or no disc has been inserted
- the symbol „- - -" and the word „no" appear in the display.
NOTE:
Playback of CDs produced by the user cannot be guaranteed
due to the large variety of software and CD media available.
Description of the CD buttons
PLAY/PAUSE (14)
You can briefl y interrupt and resume playback using this button.
The symbol fl ashes in the display. Pressing again continues
playback.
F.FWD/REW (15/16)
With an audio CD or a CD in MP3 format playing:
With F.FWD (15) you can jump to the next or previous track etc.
• If the button is kept pressed down, the machine starts to
search through the tracks.
• If the button is kept pressed down in stop mode the machine
quickly plays through the songs until the desired track is
reached. When the PLAY/PAUSE (14) button is pressed the
track begins to play back.
The REW button (16) can be used as follows:
Press once = This starts the current track again from the
beginning.
Press twice = This jumps back to the previous track.
Press three times = This plays the song before etc. If the button
is kept pressed down, the machine starts
to search through the tracks. If the button
is kept pressed down in stop mode the
machine quickly plays through the songs
until the desired track is reached. When the
PLAY/PAUSE (14) button is pressed the
track begins to play back.
40
05-SR 4316 AEG 40
NOTE:
In the case of CDs in MP3 format only the titles within the
current ALBUM are selected. Press the FOLDER button (10)
to change the folder.
STOP (17)
The CD stops.
REPEAT (19)
Press once = (the REPEAT emits a fi xed light) the current
track is repeated continuously.
Press twice = (the REPEAT ALL emits a fi xed light) the
whole CD is played continuously.
Press three times = the display (13) contains the word RAN-
DOM and the track number that is to be
played fi rst. All tracks are played back in
random order.
Press four times = all functions are cancelled. The normal play
mode is resumed.
Only for CDs in MP3 format
Press once = the current track is repeated continuously
(REPEAT appears in the display).
Press twice = the selected folder of the MP3 CD is
repeated continuously (REPEAT FOLDER
appears in the display). Use the FOLDER
button (10) to select individual folders.
Press three times = the whole CD is played continuously
(REPEAT ALL appears in the display).
Press four times = the display (13) contains the word RAN-
DOM, MP3 and the track number that is to
be played fi rst. All tracks are played back in
random order.
Press fi ve times = the function is deactivated and the CD is
played in the normal mode.
FOLDER (10)
Press this button during playback to change to a higher folder.
The display, e.g. 001, fl ashes briefl y. Then the CD begins to play
back automatically. If the button is pressed in stop mode the
display also fl ashes. Then start playback with the PLAY/PAUSE
button (14).

Programmed Play

This can be used to program any desired sequence of tracks.
1. Press the STOP key (17).
2. Press the PROG key (18). The number „P01" (storage
location) and the symbol PROGRAM fl ash in the display
(13). Use the F.FWD/REW buttons (15/16) to select the
desired track and then press the PROG button (18) again.
The display changes to memory slot P02.
NOTE:
In the case of CDs in MP3 format only the titles within the
current ALBUM are selected. Press the FOLDER button
(10) to change the folder.
21.05.2007, 15:09:40 Uhr