Playing Cds/Mp3 - AEG CDP 4226 Bedienungsanleitung

English
44
CAUTION:
• Different battery types or new and used batteries must not be used together.
• Batteries are not to be disposed of together with domestic wastes. Dispose of the
used batteries at the relevant collection bin or at your dealer' s .
WARNING:
Do not expose batteries to extreme heat, such as sunlight, fire or similar. There is a dan-
ger of explosion!
PHONE Headphone jack (1)
For headphone operation, use a headphone set with a 3.5 mm stereo jack plug plugged
into the headphone jack.
Volume
The desired volume can be sent using the VOLUME regulator (2).
Power off
Switch the device off during stop mode by pressing the button (6) once.
During playback, press the button twice to switch off the device.
NOTE:
When in stop mode, the device will automatically turn off after 30 seconds without
operation.
ESP function
The device features an anti-shock function. When activated, the display will indicate the
function briefly. In case of problems, the device will be able to read the CD music files from
the fast memory without any problems. Sampling mistakes will be corrected later in the
fast memory.

Playing CDs/MP3

1. Open the CD-compartment by pressing the
2. Insert an audio CD with the printed side facing upwards on to the central cone so that
the CD clicks into place and then close the lid of the CD compartment.
3. Press the button (7) to switch on the device. The ESP memory will load and the
display will briefly indicate the activated ESP function (memory 60 seconds).
button (3).