Description Of The Osmometer K-7400; Front View; Rear View; Connection Of The Measuring Head - Knauer K-7400 Benutzerhandbuch

8

Description of the Osmometer K-7400

Front View

Measuring Head
LCD Display
Key pad
Fig. 1

Rear View

Fig. 2

Connection of the Measuring Head

Front view of the Osmometer K-7400
Buttons Function
START/STOP
VIBRATOR
ARROW KEYS
RS232 connector (printer)
Measuring head connector
Ventilator
Power connector
Main power switch
Rear view of the Osmometer K-7400
Parts of the measuring head are an inbuilt motor with a stirring wire
(vibrator), the thermistor and a cone adapting the measurement vial. The
measuring head cable is to be plugged into the connector.
The measuring vial, filled with exact 0.15 ml solution (calibration or
measuring) is to fix to the adapter. Two versions of measuring heads are
available, for the use of glass vials and plastic vials respectively. The
Description of the Osmometer K-7400
1. Starts a measurement or calibration run.
2. It interrupts any running measurement!
3. If no run can be started or stopped it causes a
jump into the main menu.
Activates the stirrer for one second. During a
measurement or calibration run the button is not
in function.
Cursor navigation buttons for parameter or value
selection