Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
20
Run Settings
Fig. 11
Fig. 12
Warning bevor overwriting existing results
Sample List
New sample list
Using the EuroOsmo® 7400 Software
Select the number of the sample to be
measured via the pull down menu.
Start button for any measurement or calibration
run. While starting the run it changes to a stop
button to enable a manually aborting of the run.
If the sample has already been measured the
following warning will be displayed when the
button is used.
This list is used to name the samples and their
codes. The measurement results will be filled in
automatically. Using the scroll bar at the bottom a
Comments
column
detailed information. Using the „insert row" and
„delete row" functions of the EDIT menu the list
can be extended ore shortened.
The samples will be measured in the order of the
list and the results are filled in and stored in it.
Double clicking on the No. of an already measured
sample displays the corresponding temperature
sequence. On top of the graph the path of the
already stored sample list is shown.
becomes
accessible
for
Werbung
Inhaltsverzeichnis
