Operational Anomalies - THERMEx S-DD4 Bedienungsanleitung

OPERATIONAL
ANOMALIES
SYMPTOM
The hood does not
work...
The hood has low
output...
The hood stops in the
middle of operation.
AFTER SALES SERVICE
Any maintenance on your equipment should be undertaken by:
• Either your dealer,
• Or another qualified mechanic who is an authorized agent for the brand appliances.
When calling, please mention the appliance details (Type Fig. 18a and equipment Fig. 18b and
production date Fig. 18c).
QThis information is mentioned on the rating label and the production date one placed on the
lower side of the downdraft.
Downloaded from www.Manualslib.com
Check that:
• There is not a power outage.
• A specific speed has actually been selected.
• The 9 pole connection is inserted properly.
• The red reset key, found over the electric system box, is pushed.
• Make sure that the wires are inserted properly in the 9 pole connec-
tion, in the connector itself (during the connection phase, an excessive
pressure could bend the contacts).
Check that:
• The motor speed selected is sufficient for the quantity of fumes steam
present.
• The kitchen is ventilated well enough to allow for air intake.
• The charcoal filter is not worn (filtering version cooker hood).
• The air outlet channel is free and compliant with paragraph 2.
• The non-return valves of the suctioning unit are free to rotate.
Check that:
• There is not a power outage.
• The omnipolar device has not tripped.
S-DD4
manuals search engine
SOLUTION
NOTA
53