Renkforce E-SA 9 Bedienungsanleitung Seite 26

(1) Mains switch POWER
The amplifier is switched on or off using this switch.
When the switch is depressed, the device is on. If the switch is not depressed (position OFF), the device is turned
off.
(2) Operating display
This LED will light up when the device is switched on.
(3) Surround switch
By pressing this switch, you activate the SURROUND output on the back of the device.
(4) BALANCE control
With this control, you adjust the volume balance between the left and the right loudspeaker channel.
In the central position, playback takes place at the same volume via both loudspeakers.
Turning clockwise reduces the volume of the left loudspeaker. Turning counter-clockwise reduces the volume of the
right loudspeaker.
(5) VOLUME control
Using this control, you can set the volume.
Turning this control clockwise increases the volume. Turning counter-clockwise reduces the volume.
(6) Bass control (BASS)
With the bass control, you influence the intensity of bass playback.
Bass playback is amplified when turning the control clockwise. Bass playback is dampened when turning the control
counter-clockwise.
(7) Treble control (TREBLE)
With the treble control, you influence the intensity of treble playback.
Treble playback is amplified when turning the control clockwise. Treble playback is dampened when turning the
control counter-clockwise.
26
Downloaded from www.Manualslib.com manuals search engine
Operating Instructions

English