Switching On/Off; Volume / Tips - Loc8tor Tabcat Safe & Found Bedienungsanleitung

SWITCHING ON / OFF
ON
• Hold in the right hand side button (see Button Guide) for 2 seconds.
• The Tabcat will bleep and all the lights flash.
• Small status light will flash whilst on.
• The Tabcat will automatically power down after 45 seconds if left idle.
OFF
• Hold in the right hand side button for 2 seconds. Tabcat will beep and turn off.
VOLUME
Press in the left hand side button to select from three volume settings; Off, Low or High.
An audio beep will sound when pressed indicating the current volume level.
TIPS
• Write on the sticky label provided which button is allocated to each Tag / item.
• If a locate button is pressed with no Tag assigned to it an error tone will sound and the status lights
will blink rapidly. To register a Tag to this button, complete the steps 'REGISTER A TAG'.
6
Downloaded from www.Manualslib.com manuals search engine
www.mytabcat.com