Inhaltsverzeichnis
Werbung
4.2 Start Up Procedure
（Pic.4.2.1）
（Pic.4.2.2）
(1) When placing the iCleaner
Rover in the pool: you must
wobble the iCleaner Rover
according Pic.4.2.1 to make
sure the air inside is released
when you put the iCleaner
Rover in the water, so it will
automatically sink to the
bottom of pool.
(2)Start : press "
"button,
LED "power" indicator and
"0.5H" cycle time LED will
illuminate(see pic.4.2.2).
you may select 0.5Hr, 1Hr or
2Hrs cleaning time using the
"
" button on the Remote
Control and relative LED
indicators will illuminate on
the Power Box when selected.
- 7 -
5.2 Sponge Wheel
※
Replace the Sponge Wheels if they are badly worn or broken
OPEN
Latch
（Pic.5.2.2）
Step 1
※
Invert the iCleaner Rover
on the floor, remove the
Base Plate(push Latch to
unlock the Base Plate).(Pic.5.2.1)
Step 2
※
Remove the Filter Net from
the iCleaner Rover while
pressing the Latch according
to the diagram.(Pic.5.2.2)
- 12 -
Werbung
Kapitel
Inhaltsverzeichnis
