Safety Instructions For All Types Of Use; Safety Instructions For Cut-Off Grinding - Parkside Performance PTP 6 A1 Montage-, Bedienungs- Und Sicherheitshinweise

For angle grinder work with hand-held grinding tools, insert the cutting disc
evenly into the cutting gap . Do not tilt the hand-held machine .
Turn off your hand-held angle grinder and allow it to stop rotating before
setting it down on the ground or your workbench .
˜ Safety instructions for all types of use

Safety instructions for cut-off grinding

Do not use any equipment not expressly intended for use with and
recommended by the manufacturer . The ability to successfully mount
equipment to your power tool guarantees safe use in no way .
The maximum speed of the attachment must be at least as high as that of
the power tool . Running attachments at speeds that exceed their maximum
rated speed may cause them to break, release from the power tool and
cause injury .
The exterior diameter and thickness of the attachment must correspond to
the size requirements of your power tool . Incorrectly measured attachments
cannot be sufficiently shielded or controlled .
8 GB/IE/NI