Recalling A Station; Setting The Time - JGC -WE-055 Bedienungsanleitung

size: 100x145mm
RADIO OPERATION, CLOCK FUNCTIONS
Saving station
• You can store a total of 40 stations for easier access. 10 preset keys are
• Use the BAND/WAKE button (16) to select a frequency range and set the
• Press the TIME SET/MEMORY button (4). The preset key number and the
• Proceed with storing further stations.
• You delete a station from the preset key if you save another station in this
• Note: If you do not press any buttons for approximately 7 seconds, the display

Recalling a station

• Recall the preset key by pressing the number keys (17). The station is then
• Press the number key 0 to call up the preset key 10.
• The preset key number is shown on the display (6).

Setting the time

• The time can only be set in standby-mode.
• Press the TIME SET/MEMORY button (4). The time is then shown flashing on
• Press the MIN- (13) and HOUR+ (12) button to set the minutes and hours.
• Note: If you do not press any buttons for 5 seconds, the display returns to its
34
JGC-WE-055-IM-DE-EN-V2.indb 34
Downloaded from www.Manualslib.com
available for each frequency range.
desired station.
control display MEMO flashes on the display. With the number keys (17), the
desired preset key can be selected and stored by pressing the TIME SET/
MEMORY button.
storage space. The previously stored station is automatically written over.
shows its previous display. Then you must press the TIME SET/MEMORY
button again.
automatically set.
the display (6).
Confirm with the TIME SET/MEMORY button.
previous screen. Then you must press the TIME SET/MEMORY button again.
manuals search engine
19/01/2010 1:51 PM