Using On-Screen Menus; Operating Through Menus; Menu Guide - Sony PFM-500A1WU Bedienungsanleitung

Using On-screen Menus

Operating Through Menus

Menu operating buttons
There are four buttons on the monitor and the Remote
Commander for menu operations.
Remote Commander
SELECT
The buttons on the control panel are used for
explanation purpose in this operating instructions.
The ENTER button on the Remote Commander has the
same function as the ENT button on the control panel
and the SELECT +>/–. buttons on the Remote
Commander as same as the >/. buttons on the control
panel.
Configuration of the menu
To select the language used in the menu, see page
31(EN).
1
Press MENU.
The main menu appears on the monitor screen.
M A I N M E N U
P I C C O N T R O L
P I C S I Z E
C O N F I G
M E M O R Y
R E M O T E
S T A T U S
S E L E C T
2
Press >/. to move the cursor (z) and press ENT
to select a menu.
The selected menu appears on the monitor screen.
3
Press >/. to move the cursor (z) and press ENT
to select an item.
The menu for the selected item appears on the
monitor screen.
4
Press >/. to adjust or select the setting and press
ENT to set.
The setting is registered and the menu returns to
the previous menu.
To return to the normal screen, press the MENU button
repeatedly until the menu disappears.
18 18
(EN)
Downloaded from www.Manualslib.com
Monitor
MENU
MENU .
ENTER
C A N C E L
ENTER MENU
manuals search engine

Menu Guide

Note
"– – – –" appears next to an item when its function is
not available. The availability depends on the types of
input signal.
PIC CONTROL menu
ENT
>
This menu is used for adjusting the picture.
1
2
3
4
5
6
7
1 CONTRAST
Press > to increase the contrast and press . to
decrease it.
2 BRIGHTNESS
Press > to make the picture brighter and press . to
make it darker.
3 CHROMA
Press > to increase color saturation and press . to
decrease it.
4 PHASE
Press > to make overall picture greenish and press .
to make it purplish.
5 COLOR TEMP
Select the color temperature from HIGH (6500K) or
LOW (about 5500K).
6 PICTURE AGC
Select ON to improve the contrast automatically when
a low intensity signal is input.
For details on the picture AGC function, see "Emphasizing
the Contrast of the Picture (Picture AGC Function)" on
page 24(EN).
7 RESET
Select to restore the factory settings in the PIC
CONTROL menu items 1 to 6.
For details on using the reset function, see "Restoring the
PIC CONTROL Menu Items to Original Settings" on page
25(EN).
P I C C O N T R O L
C O N T R A S T : 8 0
B R I G H T N E S S : 0 0
C H R O M A : 0 0
P H A S E : 0 0
C O L O R T E M P : H I G H
P I C T U R E A G C : O N
R E S E T
S E L E C T C A N C E L
ENTER MENU