BEROTEC MOFESSOR Benutzerhandbuch Seite 20

B E R O T E C
E x p e r t m o d e
The expert mode is a possibility integrated in the chain oiler to freely adjust the lubrica-
tion quantity independent of the steps 0-9.
The levels 0-9 set the time between the lubrication intervals. These are permanently
stored, tried and tested and sufficient for most applications:
Level
0
1
2
3
4
5
6
7
8
9
If a stronger or weaker lubrication is desired, a free time interval can be set:
Set rotary switch to level 0
»
Level 0 is used as a memory location for the freely programmed time. The table
»
value (445 seconds) is finally overwritten.
Press and hold the rain switch for 10 seconds (ignoring that the rinse mode is acti-
»
vated after 4 seconds, keep the switch pressed)
After 10 seconds the LED starts flashing every second, the switch can now be relea-
»
sed.
Stop time or count seconds (flashing) until the desired setting is reached.
»
Press the rain switch again → LED stops flashing, time has been saved in the control-
»
ler to level 0.
The setting range is limited between 10 seconds and 3600 seconds (1 hour).
The procedure can be repeated as often as required, the old setting is overwritten.
»
The lubricant quantity for the rain mode is automatically adjusted to ten times the
»
amount.
Levels 1-9 can be used unchanged.
»
20
Time interval [sec]
445
406
367
329
290
251
213
174
135
96
MOFESSOR
English
Time interval [sec]
Rain Mode
45
40
37
33
29
25
21
17
13
9