Environmental Considerations - Electrolux EVD14900 Bedienungsanleitung

14 www.electrolux.com
The vacuum
cycle starts,
activiating the
vacuum pump,
but then stops
within a few
seconds without
evacuating the
thank or sealing
the bag.
Alarm messages
Alarm
The
flash continuously.
The
flash continuously.
The
buttons flash
continuously.
The
flashes
continuously.
8.2 Assistance Data
If it is not possible to find a solution to
the problem, contact the authorised
Assistance Centre.

9. ENVIRONMENTAL CONSIDERATIONS

Recycle materials that carry this symbol
.
Dispose of the packaging in special
containers for recycling. Help protect
the environment and human health and
recycle waste deriving from electric and
electronic devices.
The cover has not been closed.
The cover gasket is dirty or
worn.
Possible cause
button will The electrical board
is faulty.
The vacuum is not produced.
button will
The pump oil
and
must be replaced.
button The packaging cycle is
terminated in advance
because a wet product is
being packaged.
Apply light pressure to the top
of the cover to create an airtight
seal.
Clean the gasket.
Replace the gasket.
Solution
Contact the Technical
Assistance Service.
Clean or replace the cover
gasket.
(contact the Technical
Assistance Service to replace it).
Make sure the cover closes
correctly.
Press the
alarm.
Contact the Technical
Assistance Service.
Press the
alarm.
The information required for the
Assistance Centre is found on the data
plate on the left side of the appliance. Do
not remove the data plate.
Do not dispose of appliances that carry
this symbol together with domestic
waste.
Return the product to your local recycling
facility or contact your municipal office.
button to reset the
button to reset the