Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Starting playback
CD and SACD are started by pressing the
button.
Stopping playback
You can stop playback at any time by pressing the
button.
Selecting a Track
1) Selecting a track using the incremental control
track select wheel
Rotate the incremental control until the desired track
appears on the screen. A brief press on the incremental
control starts playing this track.
Note:
If you stop rotating the incremental control, after about
3 seconds the displayed track automatically starts
playing.
2) Selecting using a skip button (remote control)
You can initially select CD titles by pressing the skip
forward button
until you reach the desired point.
3) Selecting track - direct numeric input (remote control)
It is also possible to select a CD track by entering the
number of the section using the numeric buttons
(
. . .
Note:
If the number has more than one digit, press the digits
quickly in sequence.
Downloaded from
www.Manualslib.com
or the skip back button
) on the remote control handset.
manuals search engine
SEARCH
The standard search takes place at quadruple speed,
-
and is started by pressing the front panel buttons
/
or the remote control buttons
Press the search button again to increase the search
speed to 32 times normal speed. The search can be
stopped at any time by pressing the
The sound is muted during the fast search process.
REPEAT
The device offers several REPEAT-modes for repeating
/
chapters, titles or entire discs.
Long presses on the
machine's front panel during play back cycle through and
select the REPEAT modes.
REPEAT mode
Title / Track
Disk / Area
repeatedly
Off
REPEAT
• The REPEAT-modes can be selected with the
button.
41
button.
/
button on the
Screen display
(short message)
(persistent)
RPT TRK (CD)
REPEAT (SACD)
RPT DSC (CD)
RPT ARA (SACD)
RPT OFF
using the F1/F10 remote control handset
/
.
Screen
display
+ T
-
Werbung
Kapitel
