Problem And Solution - Domo DO229SV Gebrauchsanleitung

3. Return the filters to the motor compartment. Ensure that the black filter is at the top. Return
the cover to the motor compartment. To do this, first hook the cover onto the front of the motor
compartment and then click the cover into place.
CLEANING THE FLOOR BRUSH
1. Remove the floor nozzle from the upright vacuum cleaner. Press the
the floor nozzle and remove it from the machine.
2. Use a screwdriver to undo the lock on the bottom of the floor brush. You can then lift the lock
upwards.
3. Remove the
4. Remove hairs and other dirt that have wrapped around the floor brush. If you do not clean the floor
brush regularly, it will become damaged and your machine will become unusable.
5. Then place the rotating brush back in the floor brush. Make sure that the triangle on the rotating
brush is aligned with the triangle in the floor brush. On the other side, the round end of the rotating
brush needs to be tilted downwards.
6. Use a screwdriver to put the lock back in place.
CLEANING THE MACHINE
Clean the machine with a slightly moist soft cloth. Dry the machine off well. Never submerge the machine
in water!

PROBLEM AND SOLUTION

Problem
The machine does not start up.
The machine does not vacuum.
36
DO229SV
rotating floor brush from the floor nozzle.
·
·
·
·
·
·
Solution
The battery is empty. Charge the machine.
The battery is not inserted properly. Insert the battery until
it clicks into place.
The filters are dirty/the dust reservoir is full.
The floor nozzle is clogged/the floor brush is blocked.
The nozzle opening is clogged.
Clean the machine as described in this manual.
release button at the back of