Cleaning And Maintenance - Domo DO237SV Gebrauchsanleitung

USE
1. Plug the power cord into a socket. Slide the power button down to turn on the appliance.
2. When you turn the appliance on, the dirt will be sucked into the opening of the floor nozzle.
3. Slide the power button back up to turn the appliance off.
For the best results, clean the dust reservoir and the filters after each use. This is better for the suction
power and the life span of the machine. Make sure that the dust in the dust reservoir does not exceed the
maximum level.
ACCESSORIES
You can use the following accessories on the hand-held vacuum cleaner (by removing the shaft) or secure
them on the shaft:
1. Dust brush: for
2. Crevice vacuum

CLEANING AND MAINTENANCE

Make sure the appliance is switched off and remove the plug from the wall socket before cleaning the
appliance.
CLEANING THE MACHINE
Clean the machine with a slightly moist soft cloth. Dry the machine off well. Never submerge the machine
in water!
CLEANING THE DUST RESERVOIR
For the best results, clean the dust reservoir and the filters after each use. This is better for the suction
power and the life span of the machine.
1. Make sure that the maximum level indicated on the dirt receptacle is never exceeded. Remove the
dust reservoir from the appliance using the release.
2. Remove the filters from the dirt receptacle and then empty the dirt receptacle.
3. Remove the cotton filter and gently tap out the dust.
4. Dismantle the filter.
precise cleaning.
5. The filter and the dust reservoir can be cleaned using a mild detergent under running water. Make
sure the parts are completely dry before placing them back in the appliance.
6. Put all the parts back in the dust reservoir correctly and place the dust reservoir back in the
appliance before using it again. You will hear a click when the dust reservoir is correctly positioned.
26
DO237SV
furniture, bookshelves, curtains and hard to clean surfaces.
cleaner: for crevices, corners, stairs, keyboards,...
1
Take part A from part B. You can remove the lowest section of part A for more
Remove excess dust and dirt from the filter.
2