Noise/Vibration Information - Bosch GDS 18V-1050 H Professional Betriebsanleitung

18 | English
Impact Wrench
– Setting 1
– Setting 2
– Setting 3
B)
Max. tightening torque
B)
Max. breakaway torque
Machine screw diameter
Tool holder
Weight according to
B)
EPTA-Procedure 01:2014
Recommended ambient temper-
ature during charging
Permitted ambient temperature
C)
during operation and during
storage
Recommended rechargeable
batteries
Recommended chargers
Data transfer
D)
Bluetooth®
Signal interval
E)
Max. signal range
A) Measured at 20−25 °C with rechargeable battery ProCORE18V 8.0Ah.
B) Depends on battery in use
C) Limited performance at temperatures <0 °C
D) The mobile terminal devices must be compatible with Bluetooth® Low Energy devices (version 4.1) and support the Generic Access Profile
(GAP).
E) The signal range may vary greatly depending on external conditions, including the receiving device used. The Bluetooth® range may be signi-
ficantly weaker inside closed rooms and through metallic barriers (e.g. walls, shelving units, cases, etc.).

Noise/Vibration Information

Noise emission values determined according to
EN 62841-2-2.
Typically the A-weighted noise level of the power tool are:
95 dB(A); sound power level 106 dB(A).
Uncertainty K = 5 dB.
Wear hearing protection!
Vibration total values a (triax vector sum) and uncertainty K
h
determined according to EN 62841-2-2:
Impact tightening of fasteners of the maximum capacity of
2
the tool: a = 13.5 m/s , K = 1.5 m/s
h
The vibration level and noise emission value given in these
instructions have been measured in accordance with a
standardised measuring procedure and may be used to com-
pare power tools. They may also be used for a preliminary
estimation of vibration and noise emissions.
The stated vibration level and noise emission value repres-
ent the main applications of the power tool. However, if the
power tool is used for other applications, with different ap-
1 609 92A 5N5 | (06.08.2020)
GDS
18V-1000 18V-1050 H
Nm 0–350 0–350
Nm 0–700 0–750
Nm 0–1000 0–1050
Nm 1000
Nm 1600
mm M10–M24 M10–M24
∎ ½"
kg 3.2–4.2 3.2–4.2
°C 0 to +35 0 to +35
°C –20 to +50 –20 to +50
GBA 18V... GBA 18V...
ProCORE18V... ProCORE18V...
GAL 18... GAL 18...
GAX 18... GAX 18...
GAL 36... GAL 36...
–
s –
m –
plication tools or is poorly maintained, the vibration level
and noise emission value may differ. This may significantly
increase the vibration and noise emissions over the total
working period.
To estimate vibration and noise emissions accurately, the
times when the tool is switched off or when it is running but
not actually being used should also be taken into account.
This may significantly reduce vibration and noise emissions
over the total working period.
Implement additional safety measures to protect the oper-
ator from the effects of vibration, such as servicing the
2
. power tool and application tools, keeping their hands warm,
and organising workflows correctly.
Assembly
Remove the battery from the power tool before carry-
u
ing out work on the power tool (e.g. maintenance,
changing tool, etc.). The battery should also be re-
GDS GDS
18V-1000 C 18V-1000 PC
0–350 0–350
0–700 0–700
0–1000 0–1000
1050 1000
1700 1600
M10–M24 M10–M24
∎ ¾" ∎ ½"
3.2–4.2 3.2–4.2
0 to +35 0 to +35
–20 to +50 –20 to +50
GBA 18V... GBA 18V...
ProCORE18V... ProCORE18V...
GAL 18... GAL 18...
GAX 18... GAX 18...
GAL 36... GAL 36...
– Bluetooth® 4.1 Bluetooth® 4.1
(Low Energy) (Low Energy)
– 8
– 30
GDS GDS
18V-1050 HC
0–350
0–750
0–1050
1000 1050
1600 1700
M10–M24
∎ ½" ∎ ¾"
3.2–4.2
0 to +35
–20 to +50
GBA 18V...
ProCORE18V...
GAL 18...
GAX 18...
GAL 36...
Bluetooth® 4.1
(Low Energy)
8 8
30 30
Bosch Power Tools