Whale GP0418 Installation

Thank you for purchasing this Whale® product. For over 70 years, Whale has led the way in the
design and manufacture of freshwater and waste systems including: pumps, plumbing faucets,
showers for low voltage applications. The company and its products have built a reputation for quality,
reliability and innovation backed up by excellent customer service.
For more information please visit www.whalepumps.com
1. To The User
Read the points listed below before installation and use of equipment.
2. To The Fitter
Ensure all relevant personnel read the points listed below and that a copy is passed on to the end user.
3. Application
This product is designed for use as a domestic freshwater and saltwater hand pump in caravans and boats. The pump may also be
used in conjunction with an inline pump, or as a back up to a submersible pump.
4. Warnings
1. This product is designed for use with fresh or salt water. If it is intended for use with any other liquid, it is the
user's responsibility to ensure that the materials are fully compatible with the liquids to be used and that a
system of safe working practice is applied to installation, use and maintenance.
2. The manufacturer cannot be held responsible for claims arising from incorrect installation, unauthorised
modification or misuse of the product.
5. Installation
NOTE: Incorrect installation will invalidate warranty. Choose a
position where the pump can be operated comfortably.
NOTE: The maximum reach of the spout is 113mm (4¼"), and
the backwards reach of the lever is 150mm (6"). Two holes
are required for the mounting of the pump, one to accept the
main body and one for the location pipe.
Once a suitable location has been found to mount the pump,
use the enclosed template, and mark the centres of the two
holes to be drilled. The one for the main body is to be Ø54mm
(2⅛"), and the one for the location pipe is to be Ø8mm (
The pump is secured in position by tightening the locking ring
to the main body, from underneath the work top.
NOTE This picture is not to scale.
Hose Connections - Use 13mm (½") flexible hose.
6. Operation
To operate the pump, swivel the handle backwards and forwards. Water will discharge on one stroke only.
7. Maintenance and Winterization
The Flipper pump is designed to require minimal maintenance. Service kits AK0405 and AS0406 are available. With all Whale®
products, the complete system should be drained in preparation for winter.
8. Warranty
This Whale® product is covered by a 5 year warranty. Please see the enclosed document for details of our statement of limited
warranty.
9. Patents and Trademarks
Whale® is a registered trademark of Munster Simms Engineering Ltd, Bangor, Northern Ireland. Please contact Whale® if further
details are required.
©Copyright Whale 2018 - All rights reserved. Reproduction in whole or in part without permission is prohibited. WHALE®, is a registered trademark of Munster Simms
Engineering Limited, Bangor, Northern Ireland trading as Whale. Whale's policy is one of continuous improvement and we reserve the right to change specifications
without prior notice. Illustrations are for guidance purposes only. Neither the accuracy nor completeness of the information contained in this or any product literature is
guaranteed by the Company and may be subject to change at its sole discretion.
Munster Simms Engineering Ltd, 2 Enterprise Road, Bangor, Co. Down, N. Ireland, BT19 7TA
5 / ").
16
UK Tel: +44 (0)28 9127 6563
USA Tel: +1 802 367 1091
Flipper Pump
GP0418
47mm
UK Email: info@whalepumps.com
USA Email: usasales@whalepumps.com
EN
Ø54mm
Ø8 mm