Installation; Positioning And Connection; Freezer Compartment - Indesit BAN 40 FNF Serie Gebrauchsanleitungen

Installation

GB
! Before placing your new appliance into operation please read
these operating instructions carefully. They contain important
information for safe use, for installation and for care of the
appliance.
! Please keep these operating instructions for future reference.
Pass them on to possible new owners of the appliance.

Positioning and connection

Positioning
1. Place the appliance in a well-ventilated humidity-free room.
2. Do not obstruct the rear fan grills. The compressor and
condenser give off heat and require good ventilation to operate
correctly and save energy.
3. Leave a space of at least 10 cm between the top part of the
appliance and any furniture above it, and at least 5 cm between
the sides and any furniture/side walls.
4. Ensure the appliance is away from any sources of heat (direct
sunlight, electric stove, etc.).
5. In order to maintain the correct distance between the appliance
and the wall behind it, fit the spacers supplied in the installation
kit, following the instructions provided.
Levelling
1. Install the appliance on a level and rigid floor.
2. If the floor is not perfectly horizontal, adjust the refrigerator by
tightening or loosening the front feet.
Electrical connections
After the appliance has been transported, carefully place it
vertically and wait at least 3 hours before connecting it to the
electricity mains. Before inserting the plug into the electrical socket
ensure the following:
• The appliance is earthed and the plug is compliant with the law.
• The socket can withstand the maximum power of the appliance,
which is indicated on the data plate located on the bottom left
side of the fridge (e.g. 150 W).
• The voltage must be in the range between the values indicated
on the data plate located on the bottom left side (e.g. 220-240V).
• The socket is compatible with the plug of the appliance. If the
socket is incompatible with the plug, ask an authorised
technician to replace it ( see Assistance ). Do not use extension
cords or multiple sockets.
! Once the appliance has been installed, the power supply cable
and the electrical socket must be easily accessible.
! The cable must not be bent or compressed.
! The cable must be checked regularly and replaced by authorised
technicians only (see Assistance).
The manufacturer declines any liability should these The manufacturer declines any liability should these
! The manufacturer declines any liability should these The manufacturer declines any liability should these The manufacturer declines any liability should these
safety measures not be observed. safety measures not be observed. safety measures not be observed.
safety measures not be observed. safety measures not be observed.
50
Downloaded from www.Manualslib.com manuals search engine
Accessori
RIPIANI: pieni o a griglia.
Sono estraibili e regolabili in altezza grazie alle apposite guide ( vedi
figura ), per l'inserimento di contenitori o alimenti di notevole
dimensione. Per regolare l'altezza non è necessario estrarre
completamente il ripiano.
Contenitore FLEX COOL BOX
È il nuovo contenitore per mantenere freschi carne, pesce,
formaggi. Se collocato nella parte "bassa" del ripiano frigo è l'ideale
per carne e pesce; se spostato nella parte "alta" è ottimo per
formaggi. Se non è necessario, può essere comodamente estratto
dal frigo.
Balconcino PORTALATTINE: per riporre orizzontalmente più lattine
( vedi figura ). Vi si possono riporre anche yogurt, burro o contenitori
in genere.
*
Filtro anti-odori
Alcuni modelli sono dotati di un filtro anti-odori a carboni attivi, che
assicura una migliore qualità dell'aria all'interno del frigorifero. Il filtro
è collocato in basso a destra, dentro la bocchetta di aerazione.

Freezer compartment

ICE CARE tray
The fact that they are situated on the top part of the freezer
drawers ensures greater cleanliness: the ice no longer comes into
contact with the food placed inside the freezer compartment;
furthermore, the dripping of the water during filling is avoided (a lid
to cover up the hole after filling with water is also provided).