Installation; System Requirements; Please Note Before Connection - Silvercrest SP-2010 Bedienungsanleitung & Serviceinformationen

English

Installation

System requirements

• Computer with soundcard
or
• Audio device with audio output (3.5 mm jack socket).

Please note before connection!

Before connecting the 2.1 loudspeaker system the following
must be ensured:
• The 2.1 loudspeaker system and the audio device which is to be
connected must be switched off.
Otherwise a short circuit can occur when the plugs are connected
which can damage the speakers and/or the audio device.
• The subwoofer
placed on a level, firm surface. The distance between the sub-
woofer and the satellite loudspeakers / audio device / mains socket
must be selected so that the length of the respective cable is suffi-
cient. The cables should never be put under strain.
• Read the section "Safety Instructions"
8
Silvercrest 2.1-Speaker System SP2010
and the two satellite loudspeakers must be