Front Speakers, Left/Right Setup - Metz Soundsystem 80 Bedienungsanleitung

Opening the menu
MENU
Picture-Volume
Picture profile adjust.
Sound settings, gen.
Picture settings, gen.
Change with
– +
Testtone
Accept value with
OK
Distance to hear position 3.2m
Volume correction
OK
EXIT
2) Only for devices that are
equipped with this function.
24
Setting up the sound system

Front speakers, left/right setup

Set the TV set to the normal volume at which you
would like to watch TV.
Setting up speakers, front right / left:
• Press the MENU key.
• The TV menu appears on the screen.
• Press the blue key. The menu "Picture and
sound" and the menu item "Picture settings,
gen." are pre-selected.
• Use the assigned numeric buttons to select
"Sound System".
• Use the cursor control buttons and select the
"Front left" menu option or alternatively "Front
right" and the press the OK button.
• Use the – + button to set the test sound to "On".
The duration of the test sound is approx. 20 sec.
After switching to another loudspeaker the test
sound has to be turned on again.
Soundsystem
2)
Pict.set.,prog.posn.
off
-4
and then set the test sound to "Off" again with the
– + button.
• Press the OK button to save the new settings.
• Clear the "TV menu" with the EXIT button.
• Use the cursor control but-
tons and select the "Distance
to listening position" menu
Configuration
option.
rear left (virtual)
• Use the – + button to set the
rear right (virtual)
value for the distance.
center (virtual)
front right
• Use the cursor control but-
front left
tons to select the "Volume
Subwoofer
correction" menu option.
Settings audio
• A volume correction can be
entered with the – + button
if necessary.
• Use the cursor control but-
tons to select "Test sound"