Setting up the sound system
Configuration
This setting is only necessary if a "Metz LCD
Rack Sound System" is to be used or a
"Metz Sound System LS 5.1 W"is connected.
Setting the configuration:
• Press the MENU key.
• The TV menu appears on the screen.
• Press the blue key. The menu" item "Picture settings,
gen." are pre-selected.
• Use the assigned numeric buttons to select "Sound System".
• Use the assigned numeric buttons to select "Configu-
ration".
• If a "Metz Sound System LS 5.1 W" is connected,
use the – + button to set "Rear speakers" to "Yes".
The Rear speakers can now also be configured in the
menu.
• If a "Metz LCD Rack Sound
System" is to be used, use
the – + button to set "Rack
available" to "Yes".
The difference in height of
the sound system and TV set
will be taken into conside-
ration. Also see the picture
on the next page.
• The Sound Mode can be set
to "Stereo", "Surround
Sound" or "Surround
Sound (Music)*". This set-
ting can also be retrieved while watching TV by
means of the yellow button, and changed by pres-
sing the – + button.
• Night Mode reduces the dynamic scope of a sound-
track. Explosions are no longer much louder that
quiet dialogues and the volume is more even overall.
• Press the OK button to save the new settings.
• See the next page for other settings.
Picture-Volume
Picture profile adjust.
Sound settings, gen.
Picture settings, gen.
Change with
– +
Sound mode
Accept value with
OK
Rear speaker?
Opening the
menu
MENU
Soundsystem
2)
Pict.set.,prog.posn.
Stereo
Late night mode
Yes
Rack available?
OK
EXIT
*) only without LS5.1 system
2) Only for devices that are
equipped with this function.
Configuration
rear left
rear right
front right
front left
Subwoofer
Settings audio
on
Yes
21