Connecting And Switching On - Metz Soundsystem 80 Bedienungsanleitung

Optical cable
Power connector
DVD-Player connector panel
18

Connecting and switching on

Cinch connectors for
external AV devices
Power switch
• Use the enclosed RS232 cable to connect the
"RS 232 CONTROL" sockets on the sound
system to the "SERVICE" sockets on the Metz TV
set.
• Use the enclosed optical audio cable ("Toslink")
to connect the "TV OPTICAL" sockets on the
sound system to the "DIGITAL AUDIO OUT"
sockets on the Metz TV set. The audio signal
from the TV set can now be output via the sound
system.
• Switch on the sound system at the power switch.
The sound system is now in stand-by mode.
The power indicator light now glows red.
Metz TV set connector panel
RS 232 cable
Sound system connector panel
Switch off all other devi-
ces with the power switch
before connecting them.