Installation - Ecler UMA Serie Bedienungsanleitung

9. INSTALLATION

concerning installation and transport.
backside which are helpful during the installation of the speakers.
UMA series.
UMA112
hooks, to which chains or steel cables can be attached. Also offers a standard 35mm pole socket for
mounting on ECLER TRIP01 tripod, ECLER SR12 wall anchor or ECLER POLE01 accessory for fast
configuration to the UMA SB118 subwoofer unit. (see included diagram)
UMA115
hooks, to which chains or steel cables can be attached. Also offers a standard 35mm pole socket for
mounting on ECLER TRIP01 tripod.
UMA215
pieces from the accessory kit ECLER FL200 (see included diagram).
UMA SB118
Includes pole socket for inserting 35 mm shank of ECLER POLE01. This unit is also prepared to
stack other UMA SB118 or UMA112 / UMA115 units, due to milling on the upper side.
IMPORTANT NOTE
the accessories adapted to each application. Whenever loudspeakers are wall or ceiling
mounted, a redundant mounting system is obligatory as safety measure. Use a steel cable or
chain of suitable gauge to avoid the fall of the loudspeaker in case some element of the main
suspension system would break away from its fastening device.
Downloaded from www.Manualslib.com
The UMA series has been designed to offer the greatest possible flexibility and easiness
Each model of the range has milled lateral handles and an additional handle on the
In the following we explain the possibilities of installation for each of the speakers from the
Includes 12 embedded nuts with M8 thread that allow to hang-up the speaker inserting
Includes 12 embedded nuts with M8 thread that allow to hang-up the speaker inserting
Includes 3 hang-up points (two on the sides and one on the back) to insert the metallic
The UMA SB118 subwoofer has been designed to be installed on horizontal surfaces.
In no case should these equipments be suspended via their carrying handles; use
manuals search engine
7