Models - Ecler UMA Serie Bedienungsanleitung

4. MODELS

UMA112
magnet with 77mm coil. The high way wears a 1'' compression driver with mylar diaphragma,
attached to a 90ºx40º diffusor with constant directivity. Trapezoidal shape.
connectors for signal input and stack output. Allows stackage on subwoofer unit UMA SB118.
UMA115
magnet with 100mm coil. The high way wears a 1'' compression driver with mylar diaphragma,
attached to a 90ºx40º diffusor with constant directivity. Trapezoidal shape.
connectors for signal input and stack output.
backside that allows adapting of the high frequency response of the loudspeaker to the application or
to the character of the room the speakers are installed in.
UMA215
Ceramic magnet with 100mm coil. The high way wears a 1'' compression driver with polypropylene
diaphragma, attached to a 90ºx40º diffusor with constant directivity. Trapezoidal shape.
connectors for signal input and stack output.
UMA SB118
18'' woofer. Ceramic magnet with 100mm coil. Wears a 35mm pole socket that allows to easily stack
additional units as well as UMA112 boxes. Equipped with Speakon connectors for input and stack
output.
Downloaded from www.Manualslib.com
Loudspeaker with 15mm thick, high quality plywood. Contains a 12'' woofer. Ceramic
Provides lateral handles and an additional handle on the back side with Speakon
Loudspeaker made with 15mm thick, high quality plywood. Contains a 15'' woofer. Ceramic
Provides lateral handles and an additional handle on the back side with Speakon®
The models UMA112 and UMA115 have a presence selector for high frequencies on the
Loudspeaker made with 15mm thick, high quality plywood. Contains a double 15'' woofer.
Provides lateral handles and an additional handle on the back side with Speakon
Subwoofer unit. Loudspeaker made with 15mm thick, high quality plywood. Contains an
manuals search engine
5