Grundig EC 4600 RDS Serviceanleitung Seite 8

Setting RDS programmes with the
LEARN memory
With the push of a button you can store up to
25 RDS programmes in the LEARN memory!
The stored RDS programmes can be called up
one after the other, see "Important Informati-
on", page 20.
The LEARN memory is useful if you are
in an unknown reception area and do
not wish to erase your stored stations
(Presets).
Releasing a LEARN search
TUNER FM
Select the " " range by pressing the
¡ button.
¢ ¢
Press on the right-hand control knob until
the first signal sounds.
LRN ...
" " appears in the display and the radio
scans the FM range.
Always wait until the LEARN search is
completed. It is not possible to abort the
search function.
Cassette (TAPE)
Selecting the TAPE programme source
Slide a cassette into the cassette compart-
¡
ment or repeatedly and briefly press the
TAPE
button until " " appears in the display.
í
Do not hold back the cassette when
sliding it into the compartment.
It is possible again to select another pro-
gramme source with the ¡ button.
Changing the cassette side
Briefly press the ¡ button or automatically
at tape end:
TAPE A
" " - upper cassette side,
TAPE B
" " - bottom cassette side.
Cassette play with and without
Dolby B NR*
Activating/de-activating Dolby B NR
Press the right-hand ¢ ¢ control knob until the
signal sounds:
Dolby B NR is activated (de-activated) and
DOLBY ON
the display indicates briefly " "
DOLBY OFF
(" "); the symbol " " lights up
(goes out).
* see page 20.
Downloaded from www.Manualslib.com
2. Select a station/RDS programme (FM), for
If no reception is possible (in an under-
example, by calling up a LEARN memory
ground car park, or when the aerial is
position.
defective, for example, see page 22), the
LEARN search function can be endless. If the selected station/RDS programme is
already stored in a memory position, the
As soon as the LEARN search function is
display will indicate its number.
completed, up to 25 stations are stored
and you will hear the station giving best
3. Store the selected station/RDS programme:
reception.
¡
Briefly press the
sign is shown in the display. Select the
Calling up the LEARN memory contents desired memory position (Preset) number
1 to 48 by turning the right-hand
Select the "LEARN" mode by repeatedly pres-
knob.
sing the right-hand ¢ ¢ control knob until the
LEARN
display briefly indicates " ".
Confirm this by pressing the
or the right-hand ¢ ¢ control knob until the
¢ ¢
Turn the right-hand control knob to call up
STORED
signal sounds and "
the Presets stored in the LEARN memory in
the desired direction.
display.
While the radio scans the memory, the display
RDS-SCAN
indicates " ". If you select no Preset number, the station
is automatically allocated to the next free
Preset. The display indicates "
Allocating FM Presets
The selected AF and TP settings are stored
48 Presets (memory positions) are availabe in
along with the station.
TUNER FM
the " " range.
TUNER FM
1. Select the " " range by pressing
the ¡ button.
Not suited are music pieces containing very
Traffic announcements
soft passages (e.g. classic music), as these
passages might be treated as pauses.
Activating/de-activating TP: see radio mode.
How to proceed:
When the TP function is activated, cas-
Repeatedly and briefly press the right-hand
sette play will be interrupted during traffic
TRACK
¢ ¢ control knob until "
announcements.
display.
For example, to skip 3 (9 max.) tracks, turn
Fast forward and rewind
the right-hand ¢ ¢ control knob to the right
until the display indicates "
Repeatedly and briefly press the right-hand
WIND
¢ ¢ control knob until " " appears in the
Turning the right-hand ¢ ¢
display.
left allows for skipping up to 9 tracks in the
opposite direction (indication: "
To select fast forward (rewind), turn the right-
¢ ¢
hand control knob to the right (left) until
Cancelling the function
WIND WIND
the display indicates " >> " (" << ").
Turn the righ-hand ¢ ¢ control knob back to its
Cancelling fast forward (rewind)
home position or automatically at tape end.
Turn the righ-hand ¢ ¢ control knob back to its
Ejecting the cassette
home position or automatically at tape end.
¡
Press the button when in cassette mode
Skipping or repeating tracks
until the signal sounds. The display indicates
EJECT
" ".
Condition for this function are pauses of at
least 3 seconds between the tracks (without
announcements, etc.).
manuals search engine
Radio
Calling up Presets
PRESET
1. Select the "
and briefly pressing the right-hand
trol knob until the display briefly indicates
PRESET
" " and then the green PRESET
sign.
2. Turn the right-hand
select the desired Preset.
button. The STORE
The memory contents are maintained even
when disconnecting the battery voltage.
¢ ¢ control
Erasing Presets
¡ button
To erase an occupied memory position (Pre-
set), briefly press the
" appears in the
display indicates the STORE sign. Turn the
right-hand ¢ ¢ control knob to select the Preset
you wish to erase then press this knob until
two signals sound and the display indicates
FREE
for approximately two seconds "
".
EXPERT Control Level
To make car radio operation as easy as possi-
ble, numerous settings that you need only
once or occasionally are located in an additio-
nal control level (EXPERT).
" appears in the List of possible EXPERT settings
Code setting
Display brightness
Security LED on/off
TRACK
+3 ".
Sound signal on/off
control knob to the
AM range lock
Autom. LEARN on/off
TRACK
-9 ").
Autom. change of regional prolgramme
on/off
Switching on/off with the ignition/starter
switch
Muting during telephone mode
m
Input sensitivity for CD changer and DAT
mode
Volume limitation when switching on
Minimum volume level for traffic
announcements
u
Time indication on/off
{
Speed controlled volume.
i
RDS synchronisation of clock on/off
v
Time setting
Selecting stations/RDS programmes
with the search function
" mode by repeatedly
TUNER FM
¢ ¢ con-
1. Select the " " range by pressing
¡
the button.
2. Repeatedly and briefly press the right-hand
SEARCH
¢ ¢ control knob until " " appears
¢ ¢
control knob to briefly in the display.
3. Turn the right-hand ¢ ¢ control knob to start
the search function in the desired direction.
The search function operates with two
different sensitivities. When exploring the
frequency range the first time, it searches
for stations with high field strength (local
reception). When exploring the range the
second time, it searches also for stations
¡ button until the
with low field strength (distant reception).
4. If you wish to store the found stations on
Presets (memory positions), see page 8,
"Allocating FM presets".
ERASED
".
Changing EXPERT settings
1. Activate the EXPERT mode
¡
Press the button until the signal
sounds. The display indicates briefly
EXPERT
" ".
2. Select a setting
Select the setting you wish to check or
change by turning the right-hand ¢ ¢ control
knob.
Example:
Change the volume limitation when swit-
ching on.
Turn the right-hand ¢ ¢ control knob until
the display indicates the function with the
ONVOL 13
current value " ".
3. Activate change
Briefly press the right ¢ ¢ control knob.
The display indicates " CH " (CH = Change).
Radio
Manual frequency tuning
TUNER FM TUNER AM
1. Select the " " or " "
range.
2. Press the right-hand ¢ ¢ control knob until
the second signal sounds and the display
indicates the red "MAN" sign and briefly
MANUAL
" ".
¢ ¢
3. Turn the right-hand control knob to the
left or to the right to change the frequency
in the corresponding direction in steps of
50 kHz in the FM band and in steps of
1 kHz in the AM band. The display indica-
FM 92.70
tes " ", for example.
¢ ¢
The right-hand control knob has a
"flywheel" function for fast tuning.
4. If you wish to store the found stations on
Presets (memory positions), see page 8,
"Allocating FM presets".
5. To terminate manual frequency tuning,
press the right-hand ¢ ¢ control knob.
4. Change the setting
Use the right-hand ¢ ¢ control knob to
adjust the desired volume. The display
indicates, eg.:
Turn the right-hand ¢ ¢ control knob
to the right to increase the value or to
switch the function on.
to the left to decrease the value or to
switch the function off.
5. End the adjustment
¢ ¢
Briefly press the right-hand control
CH
knob: " " disappears from the display.
6. Select the next setting
(Repeat the steps 2. through 5.).
7. Deactivate the EXPERT mode
Press the ¡ button or press the right-
hand ¢ ¢ control knob until the signal
sounds.