Calibration Services; Specification - B+B Sensors J HM 210 Bedienungsanleitung

INSTRUCTION MANUAL
7.

Calibration Services

Calibration certificates can be issued by the factory. For this the device has to be sent to the manufacturer. Just the manufacturer can
check the factory settings and correct them if necessary.
8.

Specification

Measuring Probe
Thermocouple
Probe Connection
Resolution
Measuring Range
Type K: (NiCr-Ni)
Type J: (Fe-CuNi)
Type T: (Cu-CuNi)
Type N: (NiCrSi-NiSi)
Type S: (Pt10Rh-Pt)
Precision (for thermocouples DIN EN 60584) ±1Digit (at nominal temperature)
Range 0,1°C/F
±0,03% of m. v. ±0,05%FS
Type K
±0,03% of m. v. ±0,08%FS
Type J
±0,03% of m. v. ±0,1%FS
Type T
±0,03% of m. v. ±0,05%FS
Type N
_
Type S
General data for temperature measuring
Temperaturedrift
Point of Comparison
Nominal Temperature
Ambient Conditions
Storage Temperature
Housing
Dimensions
Material
Technical changes reserved
Thermocouple Typ J, K, N, S or T
Socket for flat pin plug, free from thermo voltage for type K
0,1°C or 1°C,
0,1°F or 1°F for types J, K, N, T
1°C or. 1°F for type S
0,1°C
-65,0... +300,0°C
-50,0... +225,0°C
-65,0... +250,0°C
-100,0... +380,0°C
_
Range 1°C/F
±0,08% of m. v. ±0,1%FS
±0,08% of m. v. ±0,1%FS
±1°C (T>-100°C)
±0,08% of m. v. ±0,1%FS (T>-100°C)
±0,1% of m. v. ±0,1%FS (T>200°C)
0,01%/K
±0,3°C
25°C
Temperature: -25 to +50°C
rel. humidity: 0 to 95%r.F. (not condensing)
-25 to +70°C
142 x 71 x 26 mm (L x B x D)
impact-resistant ABS plastic housing, membrane keyboard, transparent panel
B+B Thermo-Technik GmbH | Heinrich-Hertz-Straße 4 | D-78166 Donaueschingen
Fon +49 771 83160 | Fax +49 771 831650 | info@bb-sensors.com | bb-sensors.com
1°C
-220... +1372°C
-140... +950°C
-220... +400°C
-200... +1300°C
-50... +1768°C
0.1F
-85,0... +572,0°F
-58,0... +437,0°F
-85,0... +482,0°F
-148,0... +716,0°F
_
±1°C ±1Digit (T<-100°C)
±1°C ±0,1%FS (T<-100°C)
±1°C ±0.1%FS (T<200°C)
1°F
-364... +2500°F
-220... +1742°F
-364... +752°F
-328... +2372°F
-58... +3214°F
9 / 12