Cleaning and Disinfecting
Cleaning and disinfecting the Powerlink 4 between uses is essential to the health and safety of the
user. To help fight against the spread of germs, here are some helpful steps to cleaning and disin-
fecting your AbleNet device.
Always be sure to wear the appropriate personal protective equipment such as protective gloves and
safety glasses.
Cleaning Your Device
Before disinfecting your device, remove any dirt or debris that may be on the device.
1. Turn the device off and unplug from outlet.
2. Remove any large chunks, visible heavy dirt or debris that is attached to the device.
3. Wipe down the device with cleaning wipes.
4. Use a cotton swab soaked with cleaner to get into any tight areas that were not acces-
sible with the cleaning wipes.
5. Let the device completely dry.
Disinfect Your Device
Now that the device is clean, it is time to disinfect it. Changing protective gloves may be required
before disinfecting the device to ensure no dirt or debris is transferred back to the device.
1. Make sure the device is still turned off and unplugged from outlet.
2. Use a clean towel or wipes with Virucidal, Bactericidal, Pseudomonacidal, Tuberculo-
cidal, or Fungicidal to disinfect the surfaces of the device. It is important to note that
these chemicals only disinfect when they are wet and should be left wet on the device
for at least 4-minutes.
3. Use a cotton swab soaked with Virucidal, Bactericidal, Pseudomonacidal, Tuberculo-
cidal, or Fungicidal to disinfect the tight areas that were not accessible with the towel
or wipes. Make sure the chemical stays wet on the device for at least 4-minutes.
Miscellaneous Information
Product Dimensions:
Length: 6 Inches (152mm)
Width: 7.25 Inches (184mm)
Height: 2.3 Inches (58mm)
Weight: 3.15 lbs. (1.4 Kg)
Display:
Dual Digit Numeric Display
7 segment
Red LED
7.82 Inches (20mm) x .5 Inches (12.8mm)
Firmware version
Firmware version is displayed on the Dual Digit Numeric Display during power up.
Power Consumption
Standby:
Max:
US - 1440 W
CE - 2300 W
9