Herunterladen Inhalt Inhalt Diese Seite drucken

Klick-Codes / Click Codes - Kessebohmer 839 113 901 Bedienungsanleitung

Handschalter
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

If the main power breaks down or is disconnected from the control unit
Notice
during movement of the drives, a manual reset might be necessary.
7.3

Klick-Codes / Click codes

Sobald die Steuerung mit Strom versorgt wird, nutzt die Steuerung die eingebauten Relais um
den Benutzer akustisch über den System-Status, sowie über den Grund der letzten Abschaltung
zu informieren. Die nachfolgende Tabelle zeigt, wie die Anzahl der Klicks mit den verschiedenen
Informationen zusammenhängt.
Anzahl der Klicks Status-Information
2x
1x
3x – 6x
7.3
Click codes
When the control unit is switched on the control unit uses its relays to inform the user acoustical-
ly about the system state and the reason why the control unit was switched off before. The table
below shows which number of clicks corresponds to certain information.
Number of clicks State information
2x
1x
3x – 6x
www.kesseboehmer.de
Normalbetrieb: Das System arbeitet ohne Probleme
Notbetrieb:
Das System ist im Notbetrieb, die Antriebe können nicht genutzt werden.
Überprüfen Sie die LEDs und/oder den Fehlercode am Display des Hand-
schalters.
Letzte Abschaltung unvollständig / Erzwungener Reset:
Überprüfen Sie die LEDs und/oder den Fehlercode am Display des Hand-
schalters.
Falls die Steuerung einen Datenspeichervorgang nicht abschließen konnte,
bevor z. B. der Strom ausgefallen ist, klickt sie bei erneuter Inbetriebnahme
4 - 5 Mal und geht in den Resetmodus ohne aber in diesem Fall den Fehler
code 81 anzuzeigen.
Normal operation: No problems detected
Emergency operation:
The system is in Safe-State, movement is not possible. Check LED indication
and/or error codes on the display of the handswitch.
Last shutdown incomplete / forced reset:
Check LED indication and/or error codes on the display of the handswitch.
In case the control couldn't complete the data storage process (e.g. before
a power failure) it will click 4-5 times at next operation start-up and will enter
the reset mode without displaying the error code 81.
Anhang / Appendix
45

Quicklinks ausblenden:

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis