RND lab RND 355-00010 Bedienungsanleitung Seite 15

6-6.Auto Power Off
• Open the setup menu, position the menu selector next to the menu item labeled Display
and press the ENTER Button (F1).
• Then Position the menu selector next to the menu item labeled Auto Power Off and press
the EDIT Button (F1).
• To set Auto Power Off, use UP (F2) and DOWN (F3) to adjust the time to one of
the preset values.
• 0 is disable the timeout feature.
• Press the OK Button (F1) to set the selected time, press the CANCEL Button (F4) to return.
6-7.Foreground and Background
• Open the setup menu, position the menu selector next to the menu item labeled Display
and press the ENTER Button (F1).
• Then position the menu selector next to the menu item labeled Foreground and
Background and press the OK Button (F1).
• Use UP (F2) and DOWN (F3) to adjust.
28
EN
6-8.Set Font
• Open the setup menu, position the menu selector next to the menu item labeled Display
and press the ENTER Button (F1).
• Then Position the menu selector next to the menu item labeled Select Font and press the
EDIT Button (F1)
• Use UP (F2) and DOWN (F3) to adjust.
6-9.Bluetooth
• You can use the Bluetooth communication link and transfer the contents of a meter's
memory to a PC.
• Open the setup menu, position the menu selector next to the menu item labeled
Bluetooth and press the the ENTER Button (F1).
• Turn on Bluetooth" and press the OK Button (F1) , "Turn off Bluetooth" and press the OK
Button (F1).
• The Bluetooth app can be installed on mobile phones. The recommended
communication distance between mobile device and multimeter should not exceed
5.5m, and it will need to be re-connected manually if disconnected.
Auto range 06:32
Reset
Format
Display
Meter Info
Bluetooth
Calibration
Temperature
ENTER UP
Auto range
Tu rn on Bluetooth?
DOWN CANCEL OK
EN
06:32
CANCEL
29