Werbung
Verfügbare Sprachen
Verfügbare Sprachen
5-11.Viewing Trend Data
• Viewing data stored in the Meter's memory is performed through the save menu.
• Press the DOWN Button (F3), Position the menu selector next to the menu item labeled
ViewR and pressing the ENTER Button (F1).
• Press the the TREND Button (F1).
• Press the + Button (F2) to increase graph resolution, press the >> Button (F3) to
move cursor.
5-12.Info
• Viewing data stored in the Meter's memory is performed through the save menu.
• Press the DOWN Button (F3), position the menu selector next to the menu item labeled
Info and pressing the the ENTER Button (F1).
Auto range
06:32
ENTER
UP
DOWN
DO WN
CANCEL
24
EN
Auto range
06:32
Fno. Graph- According to graphically display
measurement information
Fno. Mode-Related to the rotary switch function
Fno. Save-Accesses the memory management
menu for saving measuremnt, setting up recording
sessions, or viewing and deleting stored
r
measurements from memory
DOWN
CLOSE
UP
DO WN
CL OSE
6.Setup Options
• Viewing data stored in the Meter's memory is performed through the save menu.
• Press the DOWN Button (F3), position the menu selector next to the menu item label
Setup and pressing the ENTER Button (F1).
Auto range
06 :32
DOWN
ENTER
UP
DO WN
6-1.Resetting Meter
• The Meter's setup options can be reset to default values through the setup menu.
• Open the setup menu, position the menu selector next to the menu item labeled Reset
and press the ENTER Button (F1).
• Then a message will appear asking to confirm the reset action.
• Press the OK Button (F2) to perform the reset.
6-2.Meter Info
• The Meter Info selection lists the serial number, firmware version, are displayed.
• Open the setup menu, position the menu selector next to the menu item labeled Meter
Info and press the ENTER Button (F1).
g
Auto range
06:32
Reset
Format
Display
Meter Inf
Bluetooth
Calibration
Temperature
DOWN
CANCEL
ENTER
UP
DO WN
EN
CANCEL
25
Werbung
