Using The Keypad - Keysight Technologies U1242C Schnellstart Handbuch

Using the Keypad

Legend
Enables the frequency test
MaxMin
Hz
mode.
Vsense
Sets the Null/Relative mode.
— Sets a manual range.
— Switches between
environment temperature
compensation (ETC) and
Auto
Range
non-ETC for temperature
measurements.
— Changes the Vsense detector
sensitivity.
— Freezes the present reading in
the display (TrigHold mode).
— Automatically freezes the
present reading once the
reading is stable (AutoHold
mode; when enabled from the
multimeter's Setup mode).
Log
Press
Hold
this mode.
— Stores a record of the
measured signal and exports
it via the multimeter's optical
communication port.
— Restarts the Max/Min/Avg
recording.
Turns the backlight on/off.
Keysight U1241C/U1242C Quick Start Guide
Key response when pressed for:
Less than 1 second
Log
again to exit
Hold
More than 1 second
Starts, stops, and exits the Max/
Min/Avg recording.
Toggles on/off non-contact
voltage detection (Vsense).
Enables autoranging.
Starts and stops data logging.
Turns the flashlight on/off.
7