Safety Information - Keysight Technologies U1242C Schnellstart Handbuch

Safety Notices
CAUTION
A CAUTION notice denotes a
hazard. It calls attention to an
operating procedure, practice,
or the like that, if not correctly
performed or adhered to,
could result in damage to the
product or loss of important
data. Do not proceed beyond a
CAUTION notice until the
indicated conditions are fully
understood and met.
WARNING
A WARNING notice denotes a
hazard. It calls attention to an
operating procedure, practice, or
the like that, if not correctly
performed or adhered to, could
result in personal injury or
death. Do not proceed beyond a
WARNING notice until the
indicated conditions are fully
understood and met.
For further safety information details, refer to the
Keysight U1241C/U1242C Handheld Digital Multimeter
2

Safety Information

The U1241C/U1242C is
safety-certified in compliance with
IEC/EN 61010-1, IEC/EN
61010-2-033, CAN/CSA-C22.2 No.
61010-1, CAN/CSA-C22.2 No.
61010-033, ANSI/UL 61010-1, and
ANSI/UL 61010-033. Use with
standard or compatible test probes.
EMC Information
The U1241C/U1242C is
EMC-certified in compliance with
with IEC 61326-1/EN 61326-1,
ICES/NMB-001, and AS/NZS
CISPR 11.
Safety symbols
CAT III
1000 V
CAT IV
600 V
User's Guide.
Keysight U1241C/U1242C Quick Start Guide
Earth (ground) terminal
Equipment protected
throughout by double
insulation or reinforced
insulation
Caution, risk of danger
(refer to this manual for
specific Warning or
Caution information)
Category III 1000 V
overvoltage protection
Category IV 600 V
overvoltage protection