Pairing Headset With Bluetooth Devices (Phone, Pda); Using The Headset To Make A Call; Using The Headset To Answer A Call; Remote Control Function - Hama BSH-240 Bedienungsanleitung

Pairing Headset with Bluetooth Devices (Phone, PDA)

• Before pairing the BSH-240 Headset with Bluetooth
Devices, please make sure the host device supports any
of the following profi les : A2DP, AVRCP, Headset/Hands-
free profi les.
• With battery mounted onto Headset, click and hold Vol
Up & ON/OFF buttons together for more than 4 seconds.
When LED starts to fl ash red and blue alternately, re-
lease the two buttons. LED will then fl ash red and blue
continuously. This pairing mode will last for 1 minute and
if no pairing is made within this period, the Headset will
return to standby mode.
• Manipulate the buttons or menus of Bluetooth device
to complete pairing (Refer to device's manual as the
instructions may differ from device to device). Check
if the BSH-240 or corresponding 'Bluetooth Address' is
displayed in the list of searched devices. If device is not
found, repeat pairing procedure.
• When prompted to enter pinkey, enter 0000 which is the
fi xed pinkey for BSH-240 Stereo Bluetooth Headset.

Using the Headset to Make a Call

• Make sure Headset and mobile phone are in connection
mode and microphone plugged into USB port of Head-
set.
• To make a call, dial from the mobile phone and when dial
tone is heard, click 'MFB' once to switch over to Head-
set.
• To end a call, press ON/OFF button once. For mobile
phones supporting headset profi le only, either 'MFB' or
'ON/OFF' button may be used to end call.
• For Bluetooth phones that support Handsfree Profi le,
clicking the MFB button in a long manner will activate the
phone to redial to the last number received or called.
• To redial while listening to music from an A2DP device,
long click 'MFB'.
Note : Some phones do not support this feature. For re-
dialing, the procedures may differ from one device to
another. For some phones, clicking the MFB in a long
manner will fi rst activate the phone to display the list of
the last numbers received or called. For others, clicking
the MFB in a long manner will redial to the last number
received or called directly. And again on others it will
activate Voice dialing.
Downloaded from www.Manualslib.com manuals search engine
• To voice dial, make sure your phone supports voice dial-
ing and that it is activated and voice tags have been re-
corded. Press the ON/OFF button for one second in idle
handsfree mode.
• To make a 3 way call, while on a call, short click MFB to
answer second call. To switch from second call to fi rst
call and vice versa, short click MFB.
Note : This function can only be used if user has sub-
scribed for such service.

Using the Headset to Answer a Call

• To be able to answer a call, the Headset and mobile
phone must be connected and microphone plugged into
USB port of Headset.
• On an incoming call, bell will ring from both Headset and
mobile phone and LED on Headset will fl ash blue rapidly.
Call can be answered from phone or from Headset by
pressing 'MFB' once.
• For mobile phones supporting only headset profi le, the
ON/OFF button is used to answer incoming call.
• To end call, press 'ON/OFF' button once. For mobile
phones supporting only headset profi le, either 'MFB' or
'ON/OFF' button may be used to end call.
• If the other party ends the call fi rst, Headset will auto-
matically enter into standby mode without the user hav-
ing to press ON/OFF button to end the call.
• To reject call, short click 'ON/OFF' button.

Remote Control Function

• Headset can be used to remote control playback
functions if Headset is connected to audio device
supporting A2DP and AVRCP.
• To play 'Next' song, click and hold Vol Up button for
1 sec.
• To play 'Previous' song, click and hold Vol Down
button for 1 sec.
• To 'Pause', click MFB once during play.
• To 'Resume', click MFB once in 'Pause' mode.
• To 'Stop', click ON/OFF button once during play.
• To 'Replay', click MFB once.
11