Bluetooth ® Pairing - Hama Passion Chop Bedienungsanleitung

Inductive charging process
The charging process begins as soon as an effective induction field has been established� The status
LED (9) lights up solid blue�
If no induction connection can be established, change the position the charging box if necessary�
The charging process ends automatically once the charging box's battery is fully charged� The
status LED (9) goes out�
3
Battery capacity
Charging box
When battery levels are low (< 10%), the status LED (2) flashes red�
Earphone
When battery levels are low (< 10%), the status LED (3) flashes red and you hear "Battery Low"�
The actual battery life varies depending on the use of the device, the
settings and the environmental temperatures (batteries have a limited service life)�
Note
If you have not used the device for a few months, it can take up to 15 - 30 minutes until the
status LED (2/3) lights up red during the charging process�
6. Bluetooth pairing
®
Note - pairing
• Ensure that the Bluetooth
activated�
• Please refer to the operating instructions of your device for more information�
The earphones and the device should not be more than 1 metre apart� The shorter the distance, the
better�
Ensure that the earphones are switched on�
-enabled device is switched on and that the Bluetooth
®
function is
®
8