Herunterladen Diese Seite drucken

KIKKA BOO DARLING Gebrauchsanweisung Seite 6

Car seat group 0

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 20
MANUAL INSTRUCTIONS
ADJUSTMENT OF HANDLE
Press the red adjustment button (picture 17-K) at both sides near the handle at the same time,
and meanwhile rotate handle to desired position. You will hear a sound of "click" if the handle is
adjusted to right place. This product has 3-postion of adjustment to be selected. (picture 17)
USE OF SAFETY BUCKLE (As picture 18-A,B,C shows)
First step, put the two buckle tongue together.Second step, push buckle tongue into the buckle
slot.Third step, it will give a sound of "click" if the buckle is locked safely. Pull the buckle tongue
pop out automatically.
*The right and left buckle tongue must be joined closely before pushed into the slot. Red button
on the buckle has been tested according to safety protection standard that children don't have
enough strength to press down the button.
HOW TO ADJUST THE HEIGHT OF SHOULDER STRAP
For the safety of your child, please check the height of the shoulder strap frequently!
Child's shoulder should always be under the hole of the shoulder strap.
Picture 19:
D - Too high
H
ADJUSTMENT OF THE HEIGHT OF SHOULDER STRAP
Picture 20:
G - seat body(backrest)
I - safety belt slot
There are 2 positions for shoulder strap, please select proper position for your child.
First step, press shoulder strap adjustment button and pull out part of two straps, then
release belt buckle of the carrier and cross the buckle through the shoulder strap cross
hole. Second step, cross the buckle through the above hole from back to front.
Third step, repeat the above step to enable another shoulder strap to the new position.
Make sure two shoulder strap pass through the two shoulder strap hole at the same height.
INSTALLATION METHOD (Rear-facing) - Picture 21
cannot provide protection in circumstance of accidents and danger may occur:
-Buckle tongue has been pushed into the buckle slot.
-Safety belt is tight and without twist.
-Backrest is stable and without displacement when shaked before and after.
*Please make sure that the safety belt is without twist. Please push the extra safety belt into the
belt bin after binding the child safety car seat with safety belt. Make sure the car safety belt bind
car seat.
*The dotted line part indicates hidden part of car safety belt as shown.
HOW TO ADJUST SHOULDER STRAP (picture 22)
as you grip the two shoulder straps with your other hand. Pull the shoulder straps forward to adjust
tightness of the restrict system. Insert buckle tongue into slot after child is seated in the car seat, then
adjust belt length at crotch position. Pull the adjustment belt out and make the shoulder strap bind child
cause discomfort and a too loose shoulder strap can be dangerous.
E - Perfect
F - Too low
H - shoulder strap cross hole
J - shoulder strap
ENGLISH
ENGLISH

Werbung

loading