DJI RSC 2 Kurzanleitung Seite 7

DJI RSC 2 Quick Start Guide
2. Attach the Lower Quick-Release Plate and Lens Support
Toggle the lever on the lower quick-release plate to the unlocked position
camera , and toggle the lever to the locked position
2
the lens support to the lower quick-release plate
support* when using a long or heavy lens.
To remove the camera from the lower quick-release plate, toggle the lever to the unlocked
position and remove the camera while pressing the safety lock beside the lever.
Safety Lock
1
* The Lens-Fastening Strap (not included) is required to use SuperSmooth mode.
3. Attach the Camera to the Gimbal
Toggle the lever on the camera mounting plate to the unlocked position
lower quick-release plate
roughly balanced
3
1
The position of the camera mounting plate can be adjusted by toggling the lever on the bottom as
desired.
©
6 2020 DJI OSMO All Rights Reserved.
3
. Toggle the lever to the locked position once the camera is
2
.
2
after it is engaged. Attach
3
. It is recommended to use the lens
4
2
5
4
3
, insert the
1
and insert the
1