Herunterladen Diese Seite drucken
BEGA 12 146 Gebrauchsanweisung

BEGA 12 146 Gebrauchsanweisung

Decken- und wandleuchte für die verwendung im innenbereich

Werbung

13.18 · Technische Änderungen vorbehalten · Technical amendments reserved · Modifications techniques réservées
!
Decken- und Wandleuchte für die Verwendung im Innenbereich
Ceiling and wall luminaire for indoor use
Plafonnier et applique pour utilisation à l'intérieur
90
Gebrauchsanweisung
Anwendung
Decken- und Wandleuchte · Innenleuchte aus
mundgeblasenem Opalglas, seidenmatt mit
Aluminiumgussgehäuse, für alle Beleuchtungs-
aufgaben.
Überall dort, wo eine weiche und gleich-
mäßige Lichtstärkeverteilung benötigt wird.
Leuchte mit hoher Schutzart.
Produktbeschreibung
Leuchte besteht aus Aluminiumguss,
Oberfläche Einbrennlackierung weiß
Mundgeblasenes Opalglas, seidenmatt
2 Befestigungsbohrungen ø 5 mm
Abstand 90 mm
1 Leitungseinführung für
Netzanschlussleitung bis ø 10,5 mm
max. 3 x 1,5@
Anschlussklemme 2,5@
Schutzleiteranschluss
BEGA Ultimate Driver
®
LED-Netzteil
220-240 V x 0/50-60 Hz
DC 176-264 V
Schutzklasse I
Schutzart IP 44
Schutz gegen Eindringen fester Fremdkörper
> 1 mm und Spritzwasser
Schlagfestigkeit IK02
Schutz gegen mechanische
Schläge < 0,2 Joule
c  – Konformitätszeichen
Gewicht: 1,1 kg
Sicherheit
Für die Installation und für den Betrieb
dieser Leuchte sind die nationalen
Sicherheitsvorschriften zu beachten.
Die Montage und Inbetriebnahme darf nur
durch eine Elektrofachkraft erfolgen.
Der Hersteller übernimmt keine Haftung für
Schäden, die durch unsachgemäßen Einsatz
oder Montage entstehen.
Werden nachträglich Änderungen an der
Leuchte vorgenommen, so gilt derjenige als
Hersteller, der diese Änderungen vornimmt.
Ø 5
Instructions for use
Application
Ceiling and wall luminaire · indoor luminaire
made of hand-blown opal glass, satin matt and
aluminium alloy housing, for all lighting tasks.
They are ideal for places where a soft and
uniform lighting distribution is required.
Luminaire with a high protection class.
Product description
Luminaire made of aluminium alloy,
finish white enamel
Hand-blown opal glass, satin matt
2 mounting holes ø 5 mm
Distance apart 90 mm
1 cable entry for mains supply cable
up to ø 10.5 mm max. 3 x 1.5@
Connection terminal 2.5@
Earth conductor connection
BEGA Ultimate Driver
LED power supply unit
220-240 V x 0/50-60 Hz
DC 176-264 V
Safety class I
Protection class IP 44
Protected against granular foreign bodies
> 1 mm and splash water
Impact strength IK02
Protection against mechanical
impacts < 0.2 joule
c  – Conformity mark
Weight: 1.1 kg
Safety
The installation and operation of this luminaire
are subject to national safety regulations.
Installation and commissioning may only be
carried out by a qualified electrician.
The manufacturer accepts no liability for
damage caused by improper use or installation.
If subsequent modifications are made to
the luminaire, the person responsible for
these modifications shall be considered the
manufacturer.
BEGA Gantenbrink-Leuchten KG · Postfach 31 60 · 58689 Menden · info @ bega.com · www.bega.com
□ 160
Fiche d'utilisation
Utilisation
Plafonnier et applique · luminaire d'intérieur en
verre opale soufflé à la bouche, satiné mat avec
armature en fonte d'aluminium, pour toutes
sortes d'éclairage.
Partout là où l'on exige une répartition
lumineuse douce et uniforme.
Luminaire avec degré de protection élevé.
Description du produit
Luminaire fabriqué en fonderie d'alu,
finition laque cuite au four couleur blanche
Verre opale soufflé à la bouche, satiné mat
2 trous de fixation ø 5 mm
Entraxe 90 mm
1 entrée de câble pour câble de
raccordement jusqu'à ø 10,5 mm
max. 3 x 1,5@
Bornier 2,5@
Raccordement à la terre
®
BEGA Ultimate Driver
Bloc d'alimentation LED
220-240 V x 0/50-60 Hz
DC 176-264 V
Classe de protection I
Degré de protection IP 44
Protection contre les corps solides
> 1 mm et les projections d'eau
Résistance aux chocs mécaniques IK02
Protection contre les chocs
mécaniques < 0,2 joules
c  – Sigle de conformité
Poids: 1,1 kg
Sécurité
Pour l'installation et l'utilisation de ce luminaire,
respecter les normes de sécurité nationales.
L'installation et la mise en service ne doivent
être effectuées que par un électricien agréé.
Le fabricant décline toute responsabilité pour
tout dommage résultant d'une mise en œuvre
ou d'une installation inappropriée du produit.
Si des modifications sont apportées
ultérieurement au luminaire, l'intervenant sera
considéré comme étant le fabricant
12 146
IP 44
30
90
®
1 / 2

Werbung

loading

Inhaltszusammenfassung für BEGA 12 146

  • Seite 1 Leuchte vorgenommen, so gilt derjenige als manufacturer. considéré comme étant le fabricant Hersteller, der diese Änderungen vornimmt. BEGA Gantenbrink-Leuchten KG · Postfach 31 60 · 58689 Menden · info @ bega.com · www.bega.com 1 / 2...
  • Seite 2 LED module 3000 K LED-0263/930 Module LED 3000 K LED-0263/930 LED-Modul 4000 K LED-0263/940 LED module 4000 K LED-0263/940 Module LED 4000 K LED-0263/940 2 / 2 BEGA Gantenbrink-Leuchten KG · Postfach 31 60 · 58689 Menden · info @ bega.com · www.bega.com...