13- Mute Button; 14- Storing Telephone Numbers; 15- Dialling Stored Number; Dialing Stored Numbers - Geemarc AmpliPOWER 40 Benutzerhandbuch

Using the phone
13 – Mute button
If you wish to speak privately to someone else in the room
without your caller overhearing, press and hold the
You will still be able to hear the callers but they cannot hear you
during the mute operation. To resume normal conversation,
release the
14 – Storing telephone numbers
Your telephone can store12 direct memories including 3 priority
numbers (21 digits maximum for each memory).
For example, the 3 priority P1, P2, P3 memories allow you to
store the 3 numbers below:
= Fire
P1
To store a number please follow instructions below:
- Lift the handset.
- Press
- Press M1, M2, ..., or M9 or one of 3 priorities numbers to store
your number.
- Dial the number.
- Press
Numbers will be lost after a few hours if you disconnect your
phone. Entering a new number in memory will automatically
erase the previous number.
15 – Dialing stored numbers
- Lift the handset and await the dial tone.
- Press appropriate button M1, M2, ..., or M9
or one of 3 priority memories, the stored
number will be dialled automatically.
To register your stored phones numbers,
use the index located under the base.
button.
= Police
P2
button.
button again.
11
button.
= Doctor
P3