Santec VTC-652DNP Bedienungsanleitung Seite 45

Bedienungsanleitung / User manual VTC-652DNP
3.7 Alarm / MD (Motion Detection)
Mode:
Select the mode for the alarm and motion detection (MD).
Off
MD
EXT
MD+EXT
Area Selection:
Select the area for motion detection (1-4).
Motion detection(MD) can be enabled/disabled.
Default:
Motion detection (MD) is set as default.
Ajdust Top/Left:
The motion detection area is positioned top left.
Adjust Bottom/Right:
The motion detection area is positioned bottom right.
Sensitivity:
Adjust the sensitivity level for motion detection (MD): 1-10
Dwell Time:
Dwell time for zoom preset (10, 20, ..., 180 sec.)
Preset Selection:
Select the zoom preset number: Off, 1-10
_________________________________________________________________________________
- 45 -