Selecting Expert Mode For Setting Parameters Or Maintenance; Calibrating The Performax Easy Through The Iq Easy Platform - Simco Performax IQ Easy Bedienungsanleitung

6.2 Selecting EXPERT mode for setting parameters or maintenance

In order to set parameters and carry out maintenance, you need expert user privileges. A
password may be required. For a detailed description, please refer to chapter 6.4 of the manual
Manager IQ Easy.
Once logged in at this user level, you will remain on this level until selecting a new user level.
- Go to the main screen
- Enter the password and confirm with
the Manager, if no password is required.
- Click and go to the device to check and/or change the parameters by clicking
behind the parameter or desired action.
- By clicking you will return to the main screen.

6.3 Calibrating the Performax Easy through the IQ Easy Platform

Bar calibration should be done in case of:
- The first commissioning,
- The position of the bar has been changed
- After it has been cleaned.
Note:
Make sure that the bar is mounted in the final position and that the conveyor or the object to be
neutralised is in position but not moving (standing still).
- Go to user level expert, see section 6.2.
- Go to the device menu by clicking
- Go to the Maintenance TAB
- Click Calibrate bar
PerformaxIQEasyPerformaxIQEasySpeed_UM_9752154110_NL_D_GB_V1_2
, select settings
or return directly to the system settings page of
and choose expert.
.
GB
63