Cd/Mp3 Operation - auna ULTRASONIC CD Bedienungsanleitung

EN
30

CD/MP3 OPERATION

Discs for Playback
This system only can playback digital audio CD/MP3, finalized digital audio
CD-Recordable (CD-R) discs, finalized digital audio CD-Rewritable (CD-RW)
discs and CD-DA format digital audio CD/CD-R/CD-RW discs.
Loading a disc
1. Press the FUNCTION button on the unit to select "CD" mode.
2. Press the OPEN/CLOSE button to open the CD door, "OPEN" will be
shown on the display.
3. Place an audio CD/MP3 DISC into the tray with the front side facing up.
4. Close the CD door.
The display will show the "READING", then the total number of tracks
would be shown, if contain several folders, the total no. of folders would
be showed, and the playback will starts from the first track.
5. To remove the CD, press STOP button to stop playback, and then press
OPEN/CLOSE button to open CD door, the display will show "OPEN".
Hold the CD by its edges, and carefully take it out.
Notes:
• Make sure the disc is stopped before opening the CD DOOR.
• To ensure good system performance; wait until the unit completely
reads the disc before proceeding.
• If no disc loaded into the tray, or the disc is unreadable, the display will
show "NO DISC".
Playing a disc
1. The unit will start playback from track 1 after reading finished. The track
no. and play time would be shown on the display. To pause playback,
press the /PAIR/SCAN button. The play time will flash and current track
no. will show on the display. To resume playback, press the /PAIR/SCAN
button again.
2. To stop playback, press the STOP button, the total number of tracks will
show on the display.
Selecting a desired track/passage
To select a desired track press the t in stop mode or during play until the
desired track appears on the display. It will start play automatically.
To search for a particular passage during playback (track scanning at
high speed) press and hold the ⏭ or ⏮ button to scan the current playing