Rollei Mark II Anleitung Seite 40

Operation
40
7 . Press the sync button to switch between the different sync modes: front
curtain sync, rear curtain sync and high speed sync .
To change the menu of function keys, briefly press the on/off key .
8 . Press the modeling lamp button to activate or deactivate the modeling lamp
of the flash .
9 . Press function key 2 to switch the flash signal tone on or off .
10 . Press function key 3 to display the output power of the flash in TTL mode in
Manual mode . However, this function only works when group A is used .
ENGLISH