Rollei Mark II Anleitung Seite 29

Options
Back light
Sleep(min)
ID number
Reset
Flash
Installation
1. Charge the battery: To charge the radio trigger, connect a USB adapter
(not included) to the charging connector . Use the supplied USB cable .
Warning: Do not leave the device unattended while charging!
2. Updating the firmware: Before you put the device into operation, please
first make a firmware update with the latest firmware, which we provide in
our download center at https://downloads .rollei .com/en/startseite-english/ .
Instructions can be found here on page 42 .
Note:
• Press function keys 1 and 2 for approx . two
MID
seconds to activate the key lock .
10
• Press function keys 2 and 3 for approx . two
99
seconds to enter the option menu .
OK
29