Rollei Mark II Anleitung Seite 30

Installation
30
3. Attaching to the camera: Before connecting the trigger to your camera
make sure that both devices are turned off . Then slide the trigger into the
hot shoe of your camera .
4. Power ON / OFF: To turn the trigger on please press Power button for
about 2 seconds . To turn the device off press the Power button again for
about 2 seconds .
Functions
1. Power value:
M: In the manual mode the
power can be set from 1 .0 ~ 9 .0 .
The minimum power output is
1 .0 and the maximum one is 9 .0 .
ENGLISH
3
2
5
1
8
4