Klarstein Appenzell XL Bedienungsanleitung Seite 9

ASSEMBLY
OPERATION
1 Leave the unit switched off for the time being.
2 Pull out the cheese holder and attach the cheese to the cheese holder. Then slide the
cheese holder back under the electric heater, now you can switch on the appliance.
3 You can move the cheese rack up and down to control the melting temperature.
4 The grilling time depends on the user.
5 Once the cheese has reached the desired consistency and browning, scrape it off.
Use an Allen wrench to
install the base as shown in
the figure.
Allow the appliance to
run without food for 10
minutes before first use.
Due to manufacturing
residues, small amounts of
smoke may be noticeable.
Ventilate the room during
this time.
EN
9