Levoit Dual 100 Benutzerhandbuch Seite 10

EN
CARE & MAINTENANCE (CONT.)
Clean the silicone sealing ring and
7.
water outlet valve assembly. These
parts are small and easy to lose, so be
careful.
a. Use one hand to pull out the
sealing ring, while using the other
hand to hold the spring and valve in
place on the other side.
The spring and valve will drop out
without the sealing ring, so remove
carefully.
Clean all parts, then replace inside
b.
the water tank. Make sure the
sealing ring is properly fitted into
the water tank.
Rinse all parts and dry with a cloth.
8.
Make sure all parts are completely dry
before reassembling or storing.
a. Make sure the float is securely in
place.
not in place, water may spill out of
the base.
b. Make sure the mist tube is securely
in place. See
Tube, page 11.
10
[Figure
[Figure 3.4–3.5]
[Figure 3.6] If the float is
Installing the Mist
Figure 3.3
3.3]
CORRECT
Figure 3.4
INCORRECT
Figure 3.5
Figure 3.6